Our Products

SORT BY

  • LOW - HIGH
  • HIGH - LOW
  • A - Z
  • Z - A
miniSAS Series SATA/IDE/SAS HDD/SSD Duplicator and Sanitizer 1-1 (SAS-MS118)

$999.00

image

⊙ Speed transfers up to 18 GB per minute.
⊙ Auto skip up to 6000 error sectors of the HDD
⊙ Auto power control protects your HDD (HDD is only powered during operation)
⊙ Supports 2.5", 3.5" SATA, ZIF HDD, SSD, IDE HDD, and SAS via IDE_SATA convertor (IDE to SATA adapter-TB1529 included)
⊙ Supports 3 different duplication modes: Quick Copy (System & files), All partitions and Whole HDD
⊙ Data Sanitization: quick erase, full erase, secure erase, and DoD erase.
⊙ Supports SATA I/II/III and 4Kn HDD.

Product Description

4 kind of Copy Modes
4 copy modes available to meet different duplication task requirement.

12 Times Faster on Quick Copy
Automatically skips blank area, reduces wasted time and increases the work effeciency. Quick copy supports MBR, GPT, NTFS, Linux (ext2/3/4), Mac(HFS, HFS+, HFSX), and FAT16/32/64 formats.

3 Kind of Erase Modes
Complies with U.S.A department of defense 5220.22M data erase standard. It will overwrite HDD 3 times , to make sure the data can not be recover.

LED Indicators
Each ports has 3 color indicators. It shows the real time status.
Red Indicator: Fail
Green Indicator: Pass/OK
Yellow Indicator: Powered

Easy to carry, Multiple Purpose

Supports Various type of Interfaces
1. Supports 2.5", 3.5" SATA/SAS HDD & SSD without adapter.
2. Supports IDE, mSATA, SATA DOM, eSATA, iVDR, M.2(NGFF) and MicroSATA with additional adapter.

Accessories

Anti shick pads x2
Adaptors x1
Duplicator x1
SATA Cable x2
Power Cord x1

Specification

Model SAS-MS118
Target 1
Specification Buffer

256MB

Maximum Speed Supported 18 GB/min
Operating Type Stand alone operation, no PC required
Language Support English, Japanese
Display Monochrome LCD Display
Status LED LED (Red / Green / Yellow ) on each slot
Control Button 4 push buttons (▲ / ▼ / OK / ESC)
Function Copy Options

Quick Copy (System and Files), All Partitions,
Whole HDD, Percentage Copy

Compare Function Bit by bit compare
Erase Options Quick Erase, Full Erase, DoD Erase, DoD Erase+Compare, Secure Erase
Skip Bad Sector  Self-setting Bad sector tolerance from 0 to 65535
Compatibility HDD Type Support all major brands of 1.8”, 2.5”, 3.5” SATA/SAS HDD/SSD and SAS
HDD Format supported for Whole HDD Copy All types of Format
HDD Format supported for Quick Copy Support FAT16/32, exFAT, Mac System (HFS/ HFS+/ HFSX),  Linux(Ext2/Ext3,Ext4), NTFS
Hardware specification Power Consumption 60W
Working Temperature 5°C ~ 45°C
Storage  Temperature -20°C ~85°C
Working Humidity 20% ~ 80%
Storage Humidity 5% ~ 95%
Dimension (in) 9x7.5x3
Weight (lbs) 3
Certification

FCC, CE, RoHS

View Datasheet

hidden field
Disk Recycler

$4600.00

image

Disk Recycler is a scriptable high-speed disk drive tester, wiper, repairer built for professional hard disk recycling applications. The product can be operated either via host software, or stand-alone via a script uploaded onto a USB flash stick. Absolutely new, innovative solution guarantees full disk recertification when the condition of the hard disks is not known. It comes equipped with full circuit protection that prevents taking damage from malfunctioning storage devices attached to the unit.

Important: Disk Recycler equipment is sold on a one time, non-recurring fee basis; there are no per-use fees of any kind.

Disk Recycler system includes:

  • 1x 4-port Disk Recycler units;
  • Windows control software (runs on a separate PC);
  • 4x SATA & SAS compatible cables
  • AC power cable
  • Options: Router; ATA Adapters

Maximum number of Recycler units in one network is 200. Each unit has 4 ports, which means you can control up to 800 ports simultaneously with only one Disk Recycler software instance. Recycler system is specifically designed to function with large number of hard disk drives in one network. All ports are completely independent, and failure of one or more hard drives has no impact on other ports. You can even assign completely different tasks to each port in the network, and all tasks will still run simultaneously without affecting each other in any way. Recycler provides high speeds of up to 18 GB/min, ensuring the highest level of efficiency.

Features:

  • Custom scripts. Editor included;
  • Reports & logs. Printing supported;
  • DoD and NIST wiping methods;
  • Security Erase and linear pattern erase support;
  • S.M.A.R.T., Seek, Transfer Rate, surface scan testing;
  • Custom/Vendor Specific ATA command support;
  • Checksum calculation: MD5, SHA1, SHA224, SHA256, SHA384, SHA512;
  • HPA/DCO control;
  • Lock/Unlock commands (ATA Password set/remove);
  • Bad disk repair (sector remapping);
  • Fast internal database with CSV integration.
  • Stand-alone mode support (without host PC software).
 

What you will like the most:

  • Expandability to up to 800 drives;
  • Free software updates and support;
  • User friendly interface;
  • Easy to use editor with integrated help to compose your own custom scripts;
  • Individual control of all hard disk drives;
  • Professional testing, wiping and repairing;
  • High processing speed of 18 GB/min;
  • Reporting system;
  • Customizable to your needs;
  • Easy 2-click firmware update on all units;

Installation instructions You will need a dedicated router to connect the Disk Recycler to your computer, which requires Windows 7 or above.

See below instructions for downloading software to your computer in step 1. Follow steps 2-8 once you receive the unit.

Instructions for connection to your laptop or PC:

  1. Download and install this software  onto laptop or PC. NOTE: 2 icons will load to desktop Atola Disk Recycler & Atola Disk Recycler Script Editor.
  2. Disconnect internet or network from the PC or laptop.
  3. Disable Windows Firewall
  4. Turn off any anti-virus software

Connect any port (1-4) of router to PC/laptop

  1. Connect another port (1-4) of router to Disk Recycler.
  2. Turn on Disk Recycler – there is a power supply switch on the back and another switch in front.
  3. Wait a few minutes, some LED’s for A,B,C,D should light on. Not all will light up necessarily.
  4. Open Atola Disk Recycler software. If you see 4 boxes corresponding to the 4 ports of the Disk Recycler unit, you are ready.
hidden field
Demi YG1040

$4400.00

image

The Demi YG1040 is an all-in-one solution that performs every necessary function to all hard drives and solid state drives, including interfaces such as SATA, ATA, IDE, SCSI, SAS, and Fibre Channel (FC). Its high speed duplication capabilities can reach up to 36GB/min which means the only speed limiting factor is the storage drive itself. It also features 2 master ports to allow 1 to 1 duplication to 2 different master drives at once. It can also erase up to 3 drives simultaneously, mixing the size and interfaces of the drives. Test functions are also included to allow quick check of the storage drive to confirm it is still in proper working condition. If repair is necessary, the Demi YG1040 will reallocate bad sectors on a hard drive.When running processes on the Demi YG1040, a log file is created showing information of the storage drives connected and the exact process that was performed to the drives. These log files can be stored on a USB thumb drive or saved on a connected PC with the optional software.

SPECS:Interfaces: SAS / SATA / ATA* / IDE* / SCSI* / FC Fibre Channel* / USB3.0*
*optional adapters are additional costFunctions: Duplication / Test / Wipe / Erase / Repair / Forensics# of Ports: 4 ports – 1:1 duplication, 2x 1:1 duplication, 1:2 duplication, 3 ports for test / erase / repair

IDEAL SOLUTION FOR:IT departments – Whether you manage a large or small company’s IT network, there are times when a hard drive needs to be duplicated or erased. Sometimes the hard drive is from a PC / laptop, or maybe its pulled from a server. With the Demi XG3020 all-in-one solution, the IT department will only need this one tool to handle all the requirements necessary to backup the data in case of a failing hard drive or have it securely erased in the case of an employee leaving the company.

Medical Equipment Technician – Older medical equipment are still running on older SCSI or IDE hard drives that may be causing the equipment to fail. Sometimes its impossible to find the old software. The Demi XG3020 can duplicate those SCSI & IDE drives to the same type of drive and the replacement drive can be plugged back into the medical equipment to work again without skipping a beat.

Low Volume Electronic E-Waste Recyclers – Any e-waste recycler would love to take in any and all hard drives for resale purposes. However, before they can put a value to the hard drive, they need to know if it works. The Demi XG3020 can test the hard drive to verify it is still a good working hard drive. And since the XG3020 works with all interfaces of drives, there is no hard drive the e-waste recycler would not be able to resell, especially the higher value drives like a SAS drive.

Data Destruction Technicians – Are you erasing lots of different hard drives with different interfaces and need to provide proof of erasure? The Demi XG3020 can erase a mix of hard drive interfaces at one time and also provides a log file for techs to provide to an end client to verify the hard drive was erased.

Data Recovery Techs that need SAS / SCSI / FC support – Usually when we think of data recovery, its mostly to recovering PC’s or laptops. However, there are times when a drive such as SAS, SCSI, or FC pulled from a server or equipment need to be recovered. Demi XG3020 is one of the only few solutions on the market to be able to perform this task.

Forensics Experts – When gathering forensic evidence on digital data you must be prepared for the uncommon hard drives. Since Demi XG3020 works with all interfaces, there is no case that can’t be handled. The system provides a step by step forensic process to ensure proper evidence collection.

Features

Supports SATA 6Gbps. ATA storage is supported by using optional products sold separately.
Supports ATA/SCSI/SAS/FC/USB storage by using optional products sold separately,
Can connect to various interfaces with single unit.Ultra high speed data transfer at 37GB per minute. (Theoretical value. Varies according to performance of connected devices.)Execution logs can be immediately saved to USB memory connected to the main unit.
Deletion reports can be created based on saved logs. (Host program sold separately is required to create deletion reports.)Rugged built-in evidence preservation functions including hash value generation (MD5, SHA1, and SHA256), DD image creation and E01 creation.Deletion function conforms to various standards
Supports NSA (National Security Agency) recommended, DoD (Department of Defense) conforming, U.S. military and NCSC systems.
Enables deletion operation report creation by using terminal software (sold separately). Enables high speed copy from master storage connected via USB. (USB 3.0)Enables simultaneous copying of 2 RAID master HDDs.

Main Specifications
Supported Interfaces: SATAIII/ATA/SCSI/SAS/FC/USB3.0
Number of HDDs to be connected: 1:1 or 1:2 for copy, 3 for deletion and diagnostics
Main Functions: Entire disk area copy & compare, used area copy & compare, specified volume clip, data deletion, quick diagnosis, evidence preservation (forensics) function, USB 3.0 master function

hidden field
1 to 25 MT High Speed series HDD/SSD Duplicator and Sanitizer - MT2600H

$11600.00

image
Speed transfers up to 18 GB per minute.
Systems & files code mode supports Windows (FAT16/32/64, NTFS), Linux (ext2/ext3/ext4), and Mac (HFS, HFS+, HFSX.)
Supports 2.5", 3.5" SATA, ZIF HDD, SSD, and IDE HDD via IDE_SATA convertor (IDE to SATA adapter-TB1529 included)
Data Sanitization: quick erase, full erase, secure erase, and DoD erase.
Open platform design supports multi-interface HDD/SSD.
Real time PC monitoring
Log report management records all task details for enhanced production management.
   

MT series is a professional SATA HDD duplicator, specially designed for high volume duplication. U-Reach adopted a unique multitasking technology that can simultaneously copy 25 HDD targets with a high transfer speed of 9 GB per minute.

We guarantee the highest productivity without speed degradation, even as the number of targets increase. The MT series SATA HDD duplicator provides four copy modes: quick smart copy, all partitions copy, percentage copy and whole HDD copy that all meet different duplication task requirements. The quick copy mode copies data and skips blank area. NTFS, Linux (Ext2/Ext3/Ext4), FAT/FAT32 and Mac (HFS, HFSX, HFS+) formats are all supported with quick copy mode.

In addition, the MT series SATA HDD duplicator is equipped with different levels of secure erase functions, Quick Erase, Full Erase, DoD 5220 Erase government standards and Secure Erase, which can fulfill different levels of HDD wiping security.

Impeccable efficiency

U-Reach SATA HDD duplicator copies at 9GB/min on all HDDs simultaneously, without any speed degradation as number of targets increase. This duplicator is great for manufacturers.

Whole HDD Copy

Whole HDD Copy supports various partition formats.

Systems & Data Copy

This mode identifies HDD Windows (FAT16/32/64, NTFS), Linux(ext2/ext3/ext4) and Mac(HFS, HFS+, HFSX formats. It will copy only the data and system contained area, which enhances the copy time.

4 Sanitization methods

Device Compatibility

  • Supports GPT and MBR table formats
  • Supports Advanced format HDD, Up to 9TB device.
  • Supported OS: Linux, Unix, Windows, Macintosh, etc

Open Platform Design

  • Supports 3.5” HDD/SSD
  • Supported OS: Linux, Unix, Windows, Macintosh, etc.

Real Time Monitoring

Flawlessly MONITORS work progress during operation. It displays all information, such as writing speed, operation time, percentage of completion, etc. for EVERY PORT, which is a powerful tool for sorting out the HDD writing lag and ensuring the operational efficiency. All the information you need will appear on the PC screen.

1. Duplication status is monitored from PC while connected to it.
2. "iSecuLog" shows and records the brand name, model, S/N, duplication time, result of every HDD from all the ports and the info of both source HDD and target HDD.
3. Slow R/W speed HDD detection: lagging HDD can be easily sorted because user can see the duplication speed of every port in "Event Log".
4. Select dates to export part of the data log. Just one click will export the data into a .txt file and save on PC. The date of export is the file name. (e.g. 20130308.txt)

Log Report Management

‧ Records operation time, each port’s process details, including HDD’s model, capacity, S/N, result (pass, fail).
‧ Real-Time recording and viewing Log Report via PC-Link
‧ Log report .txt file can be generated via USB port and saved to USB device
‧ Up to 30,000 log entries can be saved. One command onto one HDD is recorded as one log entry. (e.g. duplication from 1 HDD to 21 targets will be recorded as 21 log entries)

Auto power control system
When the HDD duplicator stops executing any function, the machine will automatically cut off the power to each port to protect the HDD from damage during removal from the HDD duplicator. The power to each port will only be supplied when the machine is on.

Standalone operation
There are two operational modes: standalone and PC-link. Each mode suits various needs. Standalone is an extremely simple, user-friendly operation with only four buttons needed to accomplish infinite duplication demands.

hidden field